HSG400 CONVERSION GAS BURNER 9 INCH TUBE 120/60 NAT

HSG400 Gas Burner with 9" Tube (NG or LP) - Range: 200-400 MBTUh PART# 62379D HSG400 Gas Burner with 9" Tube (NG or LP) - Range: 200-400 MBTUh Specifications: - BTU 200,000 - 400,000 Btu/hr - Agency Approvals CSA 189810-1154925, MEA 49-83-E, MASS G3-0616-554 - Air Tube Length 9" - Air Tube Diameter(s) 4" OD - Controls 24V combination control, 3/4" IPS redundant valve. Flame rod sensor with 4 second safety delay. - Electrical (Voltage) 120V, 220/240V - Electrical (Hertz) 50 Hz, 60 Hz - Fan Housing One-piece aluminum alloy diecast housing - Firing Range 200,000 - 400,000 Btu/hr - Fuel Natural Gas & LP - Maximum Air Tube Insertion 1" less than overall tube length - Maximum BTU/Hr Input Btu/hr 400MBH - Minimum BTU/Hr Input Btu/hr 200MBH - Overall Height 12.5" - Overall Width 13.5" - Overall Length 7.75" + tube length - Shipping Weight 35 lbs. Better known in the field as the Blue Angel burner, the HSG400 remains one of the most widely used power burners around the world in its firing range. With good combustion in poor draft situations, the HSG400 delivers the performance and reliability that’s become synonymous with the Wayne name. Designed for easy installation, the burner is easy to set-up and has the ability to fire between the entire range. Identify and install the correct orifice, set the gas valve pressure and adjust the primary and off cycle dampers. All HSG400 burners are factory set to fire natural gas, while the firing of LP is easily achieved with an orifice change in the field. Replaces 62379C, 62379-011C 62379D