HSG200 9 120/60 NAT

Manufacturer: Wayne

WAYNE 62378D HSG200 CONVERSION GAS BURNER 9 INCH TUBE 120/60 NATURAL GAS - BTU 60,000 - 200,000 Btu/hr - Agency Approvals CSA 189810-1154925, MEA 49-83-E, MASS G3-0616-554 - Air Tube Length 9" - Air Tube Diameter(s) 4" OD - Controls 24V combination control, 3/4" IPS redundant valve. Flame rod sensor with 4 second safety delay. - Electrical (Voltage) 120V, 220/240V - Electrical (Hertz) 50 Hz, 60 Hz - Fan Housing One-piece aluminum alloy diecast housing - Firing Range 60,000 - 200,000 Btu/hr - Fuel Natural Gas & LP - Ignition Direct spark ignition 7,300 V ignition transformer. - Maximum Air Tube Insertion 1" less than overall tube length - Motor 3450 RPM, 120V, 2.4 amps - Mounting Adjustable flange and gasket included, pedestal mount available - Overall Height 12.5" - Overall Width 13.5" - Overall Length 7.75" + tube length - Shipping Weight 35 lbs. - 2 to 4 in-wc Pressure Rating. An alternative to the P250AF, for higher static applications, the HSG200 “Blue Angel” has long been known as a workhorse in the industry. Designed for easy installation, the burner is easy to set-up and has the ability to fire between the entire range. Identify and install the correct orifice, set the gas valve pressure and adjust the primary and off cycle dampers. Options/Variations: 62376C, 62378C, 62380C, - No need to remove the burner for normal service, the gas manifold assembly is easily removed for complete service or replacement of components. - Easy, convenient external orifice change. - Automatic, perfect alignment of combustion components. - Primary air damper with indicator. - Exclusive off-cycle damper reduces drafting back through the burner between burner firing cycles and also allows for fine-tuning of burner combustion.

SKU: WAYNE:62378D

Product Availability: 4

$1,286.16

This product must be purchased in increments of 1

Qty:

i h

WAYNE 62378D HSG200 CONVERSION GAS BURNER 9 INCH TUBE 120/60 NATURAL GAS

- BTU 60,000 - 200,000 Btu/hr
- Agency Approvals CSA 189810-1154925, MEA 49-83-E, MASS G3-0616-554
- Air Tube Length 9"
- Air Tube Diameter(s) 4" OD
- Controls 24V combination control, 3/4" IPS redundant valve. Flame rod sensor with 4 second safety delay.
- Electrical (Voltage) 120V, 220/240V
- Electrical (Hertz) 50 Hz, 60 Hz
- Fan Housing One-piece aluminum alloy diecast housing
- Firing Range 60,000 - 200,000 Btu/hr
- Fuel Natural Gas & LP
- Ignition Direct spark ignition 7,300 V ignition transformer.
- Maximum Air Tube Insertion 1" less than overall tube length
- Motor 3450 RPM, 120V, 2.4 amps
- Mounting Adjustable flange and gasket included, pedestal mount available
- Overall Height 12.5"
- Overall Width 13.5"
- Overall Length 7.75" + tube length
- Shipping Weight 35 lbs.
- 2 to 4 in-wc Pressure Rating.

An alternative to the P250AF, for higher static applications, the HSG200 “Blue Angel” has long been known as a workhorse in the industry.

Designed for easy installation, the burner is easy to set-up and has the ability to fire between the entire range. Identify and install the correct orifice, set the gas valve pressure and adjust the primary and off cycle dampers.

Options/Variations: 62376C, 62378C, 62380C,

- No need to remove the burner for normal service, the gas manifold assembly is easily removed for complete service or replacement of components.
- Easy, convenient external orifice change.
- Automatic, perfect alignment of combustion components.
- Primary air damper with indicator.
- Exclusive off-cycle damper reduces drafting back through the burner between burner firing cycles and also allows for fine-tuning of burner combustion.

Products specifications

Manufacturer	Wayne