The 0011-IFC with an Integral Flow Check is designed to reduce installation costs when zoning with “00” circulators on large residential light commercial high head medium flow applications such as hydronic or radiant heating, hydro-air fan coils, indirect water heaters or domestic water recirculation systems. By locating the patented IFC inside the pump casing, a separate in-line flow check is eliminated, reducing installation costs. The reduced pressure drop of the IFC increases the 0011 flow performance over in-line check valves. Both the IFC and cartridge are easily accessed for service instead of replacing the entire unit. Available in cast iron construction.
Features
• Integral Flow Check (IFC) Patent # 5,664,939
Prevents gravity flow
Eliminates separate in-line flow check
Reduces installed cost, easy to service
Improved performance vs.in-line flow checks
• Unique replaceable cartridge-Field serviceable
• Unmatched reliability-Maintenance free
• Quiet,efficient operation
• Direct drive-Low power consumption
• Self lubricating, No mechanical seal
• Standard high capacity output-Compact design
• Wide range of applications
• Cast Iron construction, Flanged connections
Materials of Construction
Casing (Volute): Cast Iron
Integral Flow Check:
Body,Plunger....Acetal
O-ring Seals......Nitrile
Spring.............Stainless Steel
Stator Housing: Aluminum
Cartridge: Stainless Steel
Impeller: Non-Metallic
Shaft: Ceramic
Bearings: Carbon
O-Ring & Gaskets: EPDM
Performance Data
Flow Range: 0 - 25 GPM
Head Range: 0 - 25 Feet
Minimum Fluid Temperature: 40°F (4°C)
Maximum Fluid Temperature: 230°F (110°C)
Maximum Working Pressure: 125 psi
Connection Sizes: 3/4”, 1”, 1-1/4” or 1-1/2”Flanged
Electrical Data
Volts: 115
Hz: 60
Ph: 1
Amps: 1.76
RPM: 3250
HP: 1/8
