V46AA-1 PRESSURE ACTUATED WATER REGULATING VALVE

Manufacturer: Johnson Controls

3/8" Factory Set 105 # Field Set Range 70 to 260 # Maximum Water PRessure 150 PSIG Features - No Close Fitting or Sliding Parts in Water Passages - Corrosion Resistant Material for Parts that Come in Direct Contact with Water - Accessible Range Spring Allows easy manual flushing, if required - Take-apart Construction Interior of valves accessible without removing valve from refrigeration system or pumping down - Pressure-balanced Design Valve maintains consistent setpoint against both gradual and sudden water pressure changes The Johnson Controls V46AA-1C is a 3/8 IPS pressure-actuated modulating valves that comes in two types of control action: direct acting or reverse acting. Direct-acting V46 valves are typically used for regulating refrigerant head pressure in water-cooled condensers. Reverse-acting V46N valves are typically used for bypass service on refrigeration systems and heat pump applications. Commercial V46 valves may be used with standard non-corrosive refrigerants. V46 models are also available for ammonia refrigerant. For applications where the coolant may be corrosive to the valve trim, maritime models are available, which have nickel copper (monel) valve trim.

SKU: JOHNSON:V46AA-1C

Product Availability: 1

$188.20

This product must be purchased in increments of 1

Qty:

i h

3/8"
Factory Set 105 #
Field Set Range 70 to 260 #
Maximum Water PRessure 150 PSIG

Features
- No Close Fitting or Sliding Parts in Water Passages
- Corrosion Resistant Material for Parts that Come in Direct Contact with Water
- Accessible Range Spring Allows easy manual flushing, if required
- Take-apart Construction Interior of valves accessible without removing valve from refrigeration system or pumping down
- Pressure-balanced Design Valve maintains consistent setpoint against both gradual and sudden water pressure changes

The Johnson Controls V46AA-1C is a 3/8 IPS pressure-actuated modulating valves that comes in two types of control action: direct acting or reverse acting. Direct-acting V46 valves are typically used for regulating refrigerant head pressure in water-cooled condensers. Reverse-acting V46N valves are typically used for bypass service on refrigeration systems and heat pump applications. Commercial V46 valves may be used with standard non-corrosive refrigerants. V46 models are also available for ammonia refrigerant. For applications where the coolant may be corrosive to the valve trim, maritime models are available, which have nickel copper (monel) valve trim.