-
Home
/
-
THERMAL BARRIER LINKAGE
The M9000-560 Ball Valve Linkage Kit is designed to mount a M9203 or M9208 Series actuator
to a VG1000 Series Ball Valve. The M9000-561 Thermal Barrier (Figure 2), when used with the M9000-560 Linkage Kit, allows the valve assembly to be used for fluid temperatures up to 284°F (140°C), or 15 psi (105 kPa) saturated steam.
M9000-560 Ball Valve Linkage Kit
• Two thread-forming Taptite® screws, 8-32 x 0.625 in. long, T-20 TORX® slotted pan-head screws
• One machine screw, M4x0.7 x 83 mm long, T-20 TORX slotted pan-head screws
• Two screws, thread-forming (Plastite® 48), twin helix, #10-14 x 2.75 in. long, T-20 TORX slotted
pan-head screws
• Adaptor bracket
• Drive shaft
• Adjustable pointer
• Fixed pointer
• Installation instructions
This product must be purchased in increments of 1
The M9000-560 Ball Valve Linkage Kit is designed to mount a M9203 or M9208 Series actuator
to a VG1000 Series Ball Valve. The M9000-561 Thermal Barrier (Figure 2), when used with the M9000-560 Linkage Kit, allows the valve assembly to be used for fluid temperatures up to 284°F (140°C), or 15 psi (105 kPa) saturated steam.
M9000-560 Ball Valve Linkage Kit
• Two thread-forming Taptite® screws, 8-32 x 0.625 in. long, T-20 TORX® slotted pan-head screws
• One machine screw, M4x0.7 x 83 mm long, T-20 TORX slotted pan-head screws
• Two screws, thread-forming (Plastite® 48), twin helix, #10-14 x 2.75 in. long, T-20 TORX slotted
pan-head screws
• Adaptor bracket
• Drive shaft
• Adjustable pointer
• Fixed pointer
• Installation instructions