030L2379 HAGO 22.00 GAL 80° BPS NOZZLE (220080BPS, 60492)

HAGO 22.00 GAL 80° BPS NOZZLE (220080BPS, 60492) HAGO 22.00 GAL 80° BPS NOZZLE (220080BPS, 60492) ° Trade Only Type BPS by-passing nozzles are designed to produce variable flow rates using a single nozzle. The flow of oil into the swirl chamber of the nozzle is by-passed through a return flow orifice in the nozzle distributor (disc) and a fraction of the flow is returned to the storage tank. When the by-pass valve is closed, the nozzle acts as a simplex atomizing nozzle at its rated capacity. As the by-pass valve is opened, flow through the nozzle orifice is reduced with the balance of the oil returning to the tank. Application: • Commercial and industrial combustion. Materials/Construction: • Body and disc: Type 416 Stainless Steel. • Stem and adapter:brass. • Strainers: 120 mesh, 304 s.s. up to 10 gph 60 mesh, 304 s.s. over 10 gph Availability/Spray Angles: • Flow rates: 0.85 GPH TO 50.0 GPH • Spray angles: 45°, 60°, 80° • Spray pattern: semi-solid, “universal”. Rating and Tolerances: • Flow rates: +/-5% from nominal rating @ 100 psig operating pressure, with by-pass valve closed. • Spray angles: +5°/-0° from nominal rating @ 100 psig operating pressure, with by-pass valve closed. • Test fluid: viscosity 35 SSU, specific gravity .825 @ 60°F. Features: • Accurate, predictable flow rates due to linear and uniform relationship between by-pass pressure and orifice flow. • Less than 5° fluctuation in spray angle over entire operating (turn down) range. • Turn down ratios between 3:1 and 4:1 • Variable flow rate with a constant supply pressure • Fine atomization over entire flow range. • Flow curves and data for each nominal flow rate are available upon request Ordering Information: • The part number represents the nominal flow rate, the spray angle and the nozzle type “BPS” • Example: 120060BPS