Unilift AP 12
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection. The pump is fitted with a suction strainer.
The impeller is a SEMI OPEN impeller for 7/16 in free passage suitable for pumping groundwater, surface water, rain water and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 ft mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
| Liquid: |
| Liquid temperature range: |
|
32 .. 131 °F
|
| Technical: |
| Type of impeller: |
|
SEMI OPEN |
| Maximum particle size: |
|
7/16 in |
| Approvals on nameplate: |
|
UL Listed, CSA |
| Curve tolerance: |
|
ISO 9906 Annex A
|
| Materials: |
| Pump housing: |
|
Stainless steel |
| |
|
1.4301 DIN W.-Nr. |
| |
|
304 AISI |
| Impeller: |
|
Stainless steel |
| |
|
1.4301 DIN W.-Nr. |
| |
|
304 AISI
|
| Installation: |
| Pump outlet: |
|
1 1/2" NPT |
| Maximum installation depth: |
|
32.8 ft
|
| Electrical data: |
| Type of motor: |
|
PSC |
| Power input - P1: |
|
900 W |
| |
|
0.7 kW |
| Mains frequency: |
|
60 Hz |
| Rated voltage: |
|
1 x 115 V |
| Rated current: |
|
8 A |
| Starting current: |
|
48 A |
| Cos phi - power factor: |
|
0,99 |
| Rated speed: |
|
3350 rpm |
| Capacitor size - run: |
|
20 µF/400 V |
| Enclosure class (IEC 34-5): |
|
IP58 |
| Insulation class (IEC 85): |
|
F |
| Length of cable: |
|
10 ft |
| Type of cable plug: |
|
US
|
| Others: |
| Shipping volume: |
|
1.17 ft³
|
