MEUV4 FIREYE FLAME UV FLAME AMPLIFIER

FIREYE FLAME UV FLAME AMPLIFIER UV AMP., 4 second (max) FFRT - AMPLIFIER MODULE - FFRT 4 Seconds Max - Use with flame scanners: UV1A, UV2, UV8A, 45UV3 - Normal DC Test Voltage 4 to 10 VDC The Fireye MEUV1, MEUV4, MEUVS1, MEUVS4, MERT1, MERT4, MEIR1, MEIR4, MECD1 and MECD4 are Amplifier Modules used with the Fireye Modular MicroM control. These amplifier modules provide flame scanning capabilities using any of the Fireye standard ultraviolet scanners, self-check scanners, infrared scanners, cadmium sulfide scanners, flame rods, and photocells. The Flame Failure Response Time (F.F.R.T.) of the control is determined by the selection of the amplifier module (see Ordering Information). Test jacks are provided on the amplifier modules to permit flame signal measurement during operation and is a uniform 0-10 vdc for all models MEUV4