-
Home
/
-
MERT4 FIREYE FLAME ROD AMPLIFIER MODULE FFRT 4 SEC MAX
MERT4 FIREYE FLAME ROD AMPLIFIER MODULE FFRT 4 SEC MAX
FIREYE FLAME ROD AMPLIFIER MODULE FFRT 4 SEC MAX
FlameRod/PhotocellAmp,3secFFRT
- AMPLIFIER MODULE
- FFRT 4 SEC MAX
- Use with scanners 45CM1, 69ND1
- Normal DC Test voltage 4 to 10 VDC
The Fireye MEUV1, MEUV4, MEUVS1, MEUVS4, MERT1, MERT4, MEIR1, MEIR4, MECD1
and MECD4 are Amplifier Modules used with the Fireye Modular MicroM control. These amplifier
modules provide flame scanning capabilities using any of the Fireye standard ultraviolet scanners,
self-check scanners, infrared scanners, cadmium sulfide scanners, flame rods, and photocells. The
Flame Failure Response Time (F.F.R.T.) of the control is determined by the selection of the amplifier
module
Test jacks are provided on the amplifier modules to permit flame signal measurement during operation and is a uniform 0-10 vdc for all models.
MERT4
This product must be purchased in increments of 1
FIREYE FLAME ROD AMPLIFIER MODULE FFRT 4 SEC MAX
FlameRod/PhotocellAmp,3secFFRT
- AMPLIFIER MODULE
- FFRT 4 SEC MAX
- Use with scanners 45CM1, 69ND1
- Normal DC Test voltage 4 to 10 VDC
The Fireye MEUV1, MEUV4, MEUVS1, MEUVS4, MERT1, MERT4, MEIR1, MEIR4, MECD1
and MECD4 are Amplifier Modules used with the Fireye Modular MicroM control. These amplifier
modules provide flame scanning capabilities using any of the Fireye standard ultraviolet scanners,
self-check scanners, infrared scanners, cadmium sulfide scanners, flame rods, and photocells. The
Flame Failure Response Time (F.F.R.T.) of the control is determined by the selection of the amplifier
module
Test jacks are provided on the amplifier modules to permit flame signal measurement during operation and is a uniform 0-10 vdc for all models.
MERT4