EN180014 ELITE Replacement Seal Kit for Hoffman Condensate Pumps (1/3–2 HP)
Product Description
The EN180014 ELITE Seal Kit is a complete aftermarket solution for Hoffman condensate pumps, replacing the Hoffman 180014 OEM seal kit. Designed for a wide range of B-35, C-35, and C-17 series pumps, as well as PF-B, PF, HBF, and VBF units, this kit provides all the gaskets and a 5/8" type seal necessary for quick and reliable repairs.
This kit is ideal for service professionals and maintenance teams, allowing you to replace worn seals and gaskets in a single visit and reduce downtime.
Key Features
-
✅ Replacement for Hoffman 180014 seal kit
-
✅ Fits 1/3–2 HP condensate pumps, including B-35, C-35, C-17, PF-B, PF, HBF, and VBF units
-
✅ Includes multiple head, housing, and flange gaskets plus 5/8" type seal
-
✅ ELITE aftermarket quality designed to meet or exceed OEM standards
-
✅ Ideal for service vans and maintenance teams
📦 Kit Includes
| Part # | Description | Qty |
|---|
| EN-DG0086 |
Head Gasket |
1 |
| EN-DG0134 |
Head Gasket |
1 |
| EN-DG0087 |
Head Gasket |
1 |
| EN-DG0089 |
Head Gasket |
1 |
| EN-DG0166 |
Housing Gasket |
1 |
| EN-DG0072 |
Housing Gasket |
1 |
| EN-DG0165 |
Housing Gasket |
1 |
| EN-DG0141 |
Flange Gasket |
1 |
| EN-DG0060 |
Flange Gasket |
1 |
| — |
5/8" Type Seal |
1 |
⚠️ Note: Not for use on 609 or 620 series pumps.
Quick Reference Compatibility
| Category | Compatible Pumps / Assemblies |
|---|
| Hoffman Condensate Pumps |
B-35 Series (Low-NPSH, 3450–3500 RPM), C-35 Series (3450–3500 RPM), C-17 Series (1725–1750 RPM), PF-B (616, 617, 625, 626), PF (616, 617, 625, 626), HBF, VBF units |
| Bearing Assemblies |
Pump and motor assembly 180027 |
📊 ELITE Seal Kit Quick Reference Chart
| ELITE Model | Replaces OEM / Part # | Brand | Pump Series / Models | Includes |
|---|
| EN110-275RP |
Taco 110-275RP |
Taco |
110 to 120 Series Pumps |
Seal kit only |
| EN1600-868CRP |
Taco 1600-868CRP, 1600-846CRP, 1600-170RP, 1600-170ERP |
Taco |
121–138 Pumps, 1600 Series Circulators |
Seal kit only |
| EN1600-868CRPSS |
B&G 1600-868CRP, 1600-205CRP |
Bell & Gossett |
1600 Series Pumps |
Seal kit + shaft sleeve |
| EN180013 |
Hoffman 180013 |
Hoffman |
Watchman A, B, WC, WCD Condensate Pumps; Grainer 4RD31, 4RD67, 4RD33; Hoffman WC8-20B, 609PF, WCD12-20 B-MA, 180001 |
Seal + multiple housing/flange gaskets |
| EN180014 |
Hoffman 180014 |
Hoffman |
Series B-35, C-35, C-17, PF-B, PF, HBF, VBF Condensate Pumps (1/3–2 HP) |
Seal + multiple housing/flange gaskets |
| ENSK681 |
B&G 118681, B&G 118681LF, Armstrong 816706-001, 816706-021, Hydro-Valve RM-880W |
Bell & Gossett / Armstrong / Hydro-Valve |
100 Series, 2 Series, LD3, HD3, HV, PR, PD35/37, 601–627, 90 Series, 1522 Series + many more (100+ models) |
Seal kit + 4 gaskets |
| ENDP0304 |
Hoffman DP0304 |
Hoffman |
Hoffman Watchman Condensate Pumps |
Seal kit only |
Common Symptoms (When to Replace)
-
Leaking or worn seals on condensate pumps
-
Reduced efficiency or abnormal noise
-
Preventative maintenance on high-use units
Shopping Tips
-
🔍 Check your pump series and HP before ordering
-
🏷 Verify OEM part number: Hoffman 180014
-
🧰 Keep this kit in your service van for quick on-site repairs
-
✅ ELITE aftermarket kit ensures all gaskets and seal are included for a single visit repair
❓ Frequently Asked Questions (FAQ)
Q1: Which pumps does EN180014 fit?
A: Fits Hoffman B-35, C-35, C-17, PF-B, PF, HBF, and VBF condensate pumps (1/3–2 HP).
Q2: What’s included in the kit?
A: Includes multiple head, housing, and flange gaskets plus a 5/8" type seal.
Q3: Is this an OEM kit?
A: This is an ELITE aftermarket replacement kit, engineered to meet or exceed Hoffman OEM specifications.
Q4: How often should I replace the seal kit?
A: Replace the seal when you notice leaks, unusual pump noise, or reduced efficiency, or as part of preventive maintenance for high-use pumps.
Q5: Do I need any special tools to install this kit?
A: Basic hand tools are typically sufficient. For best results, follow standard pump maintenance and disassembly procedures, and ensure the shaft and bearing surfaces are clean.
Q6: Can I use this kit on older or obsolete pumps?
A: It fits any pumps within the supported series, but is not recommended for discontinued 609 or 620 series pumps. Always verify your pump model before purchasing.
