ACTUATOR 24V NSR 90INLB ON/OFF/FLOAT

Manufacturer: Belimo

- Voltage AC/DC AC/DC 24 V - Power Consumption (Running) 2 W - Power Consumption (Holding) 0.2 W - Power Consumption For Wire Sizing 4 VA - Torque 90 in-lb [10 Nm] - Control Type Floating/3-point - Direction Of Motion Motor selectable with switch 0/1 - Manual Override External push button - Angle of Rotation 95 - Running Time (Motor) 95 s / 90° Degrees - IP54 - NEMA 2 - Ambient Temperature -22 to 122 F - 50/60Hz The NMB(X) series provides 95° of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The NMB(X)24-3… actuators use a sensor less brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions.

SKU: BELIMO:NMB24-3

Product Availability: Out of stock

$179.84

This product must be purchased in increments of 1

Qty:

i h

- Voltage AC/DC AC/DC 24 V
- Power Consumption (Running) 2 W
- Power Consumption (Holding) 0.2 W
- Power Consumption For Wire Sizing 4 VA
- Torque 90 in-lb [10 Nm]
- Control Type Floating/3-point
- Direction Of Motion Motor selectable with switch 0/1
- Manual Override External push button
- Angle of Rotation 95
- Running Time (Motor) 95 s / 90° Degrees
- IP54
- NEMA 2
- Ambient Temperature -22 to 122 F
- 50/60Hz

The NMB(X) series provides 95° of rotation and a visual indicator indicates position of the
actuator. When reaching the damper or actuator end position, the actuator automatically stops.
The gears can be manually disengaged with a button on the actuator cover.

The NMB(X)24-3… actuators use a sensor less brushless DC motor, which is controlled by an
Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s
rotation and provides a digital rotation sensing (DRS) function to prevent damage to the
actuator in a stall condition. Power consumption is reduced in holding mode.

Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the
actuator body for signaling and switching functions.

Products specifications

Manufacturer	Belimo