Kit Contains
- Wall plate 1 Qty
- Wall plate skirt 1 Qty
- Mounting bracket 1 Qty
- Tubing adaptor 3/16" x 3/16" 2 Qty
- Tubing adaptor 3/16" x 1/4" 2 Qty
- 3/16" Tubing x 1/4" threaded adaptor 2 Qty
- O-rings 2 Qty
- Powers adaptor gasket 1 Qty
- Powers adaptor 1 Qty
- Mounting screw No. 8 x 1" 2 Qty
- Wall plate mounting screws No. 6 x 1/2" 2 Qty
- Thermostat mounting screws No. 6 x 1" 2 Qty
- Tubing clamps 2 Qty
- 1/4" O.D. Plastic tubing 1 Qty
Conversion Kit Used To Mount Robertshaw thermostats In Place Of Most Competitive models.
The Thermostat Conversion Kit was designed and packaged with the serviceman in mind. It allows a quick and easy replacement of competitive devices with a new TAC Pneumatic Thermostat.
This kit will enable the serviceman to directly replace most old or obsolete thermostats of different manufacturers without having to remove the old pipe head from the wall. The two piece design of this kit allows flexibility in covering any marks left by the old thermostat, resulting in a neat and clean installation
The 22-022 Thermostat Conversion Kit may be installed on the wall in two different ways, permitting flexibility of installation. The method of mounting is determined by the particular application or by the installer’s preference. On some applications, the wall plate skirt will have to be used. On most installations, the use of the wall plate skirt is optional.
