120V 1/2 ON/OFF FAST OPEN ACT

P159A221X1X11F0 ASCO 120V 1/2 ON/OFF FAST OPEN ACT - Series 159 - 120/110V - 50/60Hz - Amps Run @ 120V/60Hz @ 1.8 Amps - Amps Run @ 110V/50Hz @ 2.2 Amps - Amps Hold @ 120V/60Hz @ 0.12 Amps - Amps Hold @ 110V/50Hz @ 0.13 Amps - Max Close Time 1 Sec - Ambient Temp -40 to 150.8 F ( -40 to 66 C) - Duty Cycle Continuous Hold - Standard General-Purpose Type 1 & IP10 - Actuator Type On/Off - Conduit Connection 1/2" NPT Electric Connection Fitting Opening Time Fast Opening - Typical time approximately 9 seconds max. - At temperatures below -22 (-30˚C), actuator may take as long as 30 seconds Slow Opening: - Typical time approximately 18 seconds max. - At temperatures below -22 (-30˚C), actuator may take as long as 60 seconds Damper Arm Rating - Drives damper in one direction only. 20 lb (9 kg) max. at 2.85" radius at 20˚F to 150˚F (-7˚C to 66˚C) and 10 lb (4.5 kg) max. at -40˚F to 20˚F (-40˚C to -7˚C) Travel 1.9" (49 mm) max. Installation - The Series 159 motorized actuator mounts in any position directly to a Series 158 or V710B valve body Features • The Series 159 motorized actuator is offered in On/Off or High/Low/Off configurations, mounting directly on the ASCO Series 158 and Series V710 • Push-type, self-contained, electrohydraulic linear actuators featuring dual internal control valves for repeatable positioning • Low-fire position is factory set at the stroke midpoint, but can be field adjustable to any position between 15% and 100% of stroke • When the actuator is mounted to a Series 158 or V710 valve body, position indicators on both sides of the actuator show the open or closed position of the valve • Available in either slow or fast opening configurations